Plus Epoxy "300 kg"
This is a 2-component
epoxy adhesive for heavy-duty applications. The bond strength can be
increased by curing at a higher temperature. It will set with a very hard
surface finish, with high resistance to impact, aging and moisture. It may be
used to bond metals, glass, porcelain, ceramic, wood, marble, stone,
concrete, Duroplast®, glass fiber reinforced
synthetics, rigid PVC, rubber, and rigid foam plastics. Not suitable for use
on large areas of glass. Working time is about two hours at room temperature.
The setting time depends on the temperature; final strength can be increased
by applying heat (not over 200°C - see table). UHU Endfest
"300kg" comes in a 33g pack in tubes.